Instructions For Preparing Homemade SOAP

Prepare a delicious and fragrant homemade SOAP that also integrates some properties for the skin care is something very simple and easy only if you know how to follow to the letter the instructions below we will give you in which you will have to use simple, easy-to-get materials and that are in common use in the home. Instructions to make SOAP home materials: * fragrance of SOAP (the essence that you prefer). * Towels. * Molds to make SOAP. * Coconut oil. Learn more on the subject from Mark Bertolini. * Distilled water.

* Not Virgin olive oil. * Essential oils of vegetable origin with fragrances. * Vinegar. * Bleach. * Rubber gloves. * Vegetable butter. * Thermometer of sugar for use in the kitchen.

* Cups for measuring quantities, mixing spoons and rubber spatulas. * Plastic bowls. * Stainless steel pots. * MITRE box. (Tool used to guide a hand saw and make precise cuts on a Board). * Safety glasses. Steps to make homemade SOAP: 1. dissolve 12 oz. lye in 32 oz of water in a plastic or glass container. If possible, do this outdoors or with an exhaust fan. 2. Add bleach to the water and not vice versa. Pour the lye slowly and in a steady stream, and constantly stir with a plastic spoon. 3. Locate side mixture to cool. Mixture will heat up considerably since lye reacts with the oils fats. This is called saponification. 4 Melt 24 oz. coconut oil and 38 oz. solid vegetable shortening in a stainless steel pot. 5 Add 25 oz. olive oil (not Virgin) and essential oils for the care of skin and fragrance that you want to use. 6 Let enfirar oils. 7. Grease the mould to make SOAP with vegetable shortening. 8. When oil and lye mixture has cooled to room temperature, slowly go by combining them, adding the lye to oils. 9 Stir slowly and constantly. If you see bubbles, stir more slowly. 10. Spray the SOAP into the pot from time to time. When maintains its shape momentary before sinking into the rest of the mix (for tracking), is the time to add the extras you want. 11. Mix the botanicals, grains and coloring in a cup of SOAP taken from mix (Extras). 12 Combine that back into the original mix. 13 Pour the SOAP into the mold. 14 Wrap the mold in a towel and let stand for 18 hours. SOAP mixture is heated and then cooled. Avoid the discovery of the mixture until it cools. 15 Allow SOAP that feels in the mould covered by another 12 hours. 16 Loosen the sides moving mould slightly. 17. Turn the mold on a clean place. 18. Cut the SOAP into bars with a knife. Some people use a miter box to make square corners. 19 Allow soap bars to cure for three to four weeks before using. Small barrras heal faster than larger ones. Original author and source of the article